Some games (GameMaker Studio) build texture atlases out of sprites during initialization, using the 2D copy method. These copies are done from textures loaded into memory, not rendered, so they are not scaled to begin with.
I had set srcTexture in these copies to force scaling, but really it only needs to scale if the texture already exists and was scaled by rendering or something else. I just set that to false, so it doesn't change if the texture is scaled or not. This will also avoid the destination being scaled if the source wasn't. The copy can handle mismatching scales just fine.
This prevents scaling artifacts in GMS games, and maybe others (not Super Mario Maker 2, that has another issue).
Fixes a regression from #2663 where buffer flush would not happen after a resize. Specifically caused the world map in Yoshi's Crafted World to flash.
I have other planned changes to this class so this might change soon, but this regression could affect a lot so it couldn't wait.
This fixes a potential regression with the new range list changes, where the cost for creating new ones would be rather large due to creating a 1024 size array. Also reduces cost for range list inheritance by using the first existing range list as a base, rather than creating a new one then adding both lists to it.
The growth size for the RangeList is now identical to its initial size. Every 32 elements was probably a little too common - now it is 1024 for most things and 8 for the buffer modified range list.
The Unmapped and SyncMethod methods have been changed to ensure that they behave properly if the range list is set null. Cleaned up a few calls to use the null-conditional operator.
* Replace CacheResourceWrite with more general "precise" write
The goal of CacheResourceWrite was to notify GPU resources when they were modified directly, by looking up the modified address/size in a structure and calling a method on each resource. The downside of this is that each resource cache has to be queried individually, they all have to implement their own way to do this, and it can only signal to resources using the same PhysicalMemory instance.
This PR adds the ability to signal a write as "precise" on the tracking, which signals a special handler (if present) which can be used to avoid unnecessary flush actions, or maybe even more. For buffers, precise writes specifically do not flush, and instead punch a hole in the modified range list to indicate that the data on GPU has been replaced.
The downside is that precise actions must ignore the page protection bits and always signal - as they need to notify the target resource to ignore the sequence number optimization.
I had to reintroduce the sequence number increment after I2M, as removing it was causing issues in rabbids kingdom battle. However - all resources modified by I2M are notified directly to lower their sequence number, so the problem is likely that another unrelated resource is not being properly updated. Thankfully, doing this does not affect performance in the games I tested.
This should fix regressions from #2624. Test any games that were broken by that. (RF4, rabbids kingdom battle)
I've also added a sequence number increment to ThreedClass.IncrementSyncpoint, as it seems to fix buffer corruption in OpenGL homebrew. (this was a regression from removing sequence number increment from constant buffer update - another unrelated resource thing)
* Add tests.
* Add XML docs for GpuRegionHandle
* Skip UpdateProtection if only precise actions were called
This allows precise actions to skip reprotection costs.
When a texture is deleted by falling to the bottom of the AutoDeleteCache, its data is flushed to preserve any GPU writes that occurred. This ensures that the data appears in any textures recreated in the future, but didn't account for a texture that already existed with a copy dependency.
This change forces copy dependencies to complete if a texture falls out from from the AutoDeleteCache. (not removed via overlap, as that would be wasted effort)
Fixes broken lighting caused by pausing in SMO's Metro Kingdom. May fix some other issues.
* Fast path for Inline2Memory buffer write
This PR adds a method to PhysicalMemory that attempts to write all cached resources directly, so that memory tracking can be avoided. The goal of this is both to avoid flushing buffer data, and to avoid raising the sequence number when data is written, which causes buffer and texture handles to be re-checked.
This currently only targets buffers, with a side check on textures that falls back to a tracked write if any exist within the target range. It's not expected to write textures from here - this is just a mechanism to protect us if someone does decide to do that. It's possible to add a fast path for this in future (and for ShaderCache, once that starts using tracking)
The forced read before inline2memory begins has been skipped, as the data is fully written when the transfer is completed anyways. This allows us to flush on read in emergency situations, but still write the new data over the flushed data.
Improves performance on Xenoblade 2 and DE, which was flushing buffer data on the GPU thread when trying to write compute data. May improve performance in other games that write SSBOs from compute, and update data in the same/nearby pages often.
Super Smash Bros Ultimate should probably be tested to make sure the vertex explosions haven't returned, as I think that's what this AdvanceSequence was for.
* ForceDirty before write, to make sure data does not flush over the new write
* Array based RangeList that caches Address/EndAddress
In isolation, this was more than 2x faster than the RangeList that checks using the interface. In practice I'm seeing much better results than I expected. The array is used because checking it is slightly faster than using a list, which loses time to struct copies, but I still want that data locality.
A method has been added to the list to update the cached end address, as some users of the RangeList currently modify it dynamically.
Greatly improves performance in Super Mario Odyssey, Xenoblade and any other GPU limited games.
* Address Feedback
* Lift textures in the AutoDeleteCache for all modifications.
Before, this would only apply to render targets and texture blit. Now it applies to image stores, the fast dma copy path and any other type of modification.
Image store always at least has one reference in the texture pool, so the function of the AutoDeleteCache keeping textures _alive_ is not useful, but a very important function for a while has been its use to flush textures in order of modification when they are dereferenced, so that their data is not lost.
Before, textures populated using image stores were being dereferenced and reloaded as garbage. Now, when these textures are dereferenced, their data will be put back into memory, and everything stays intact.
Fixes lighting breaking when switching levels in THPS1+2, and potentially some more UE4 games. I've tested a bunch more games for regressions and performance impact, but they all seem fine.
* Lift copy srcTexture so that it doesn't remain referenceless
* Perform lift before reference count change on unbind.
It's important to lift on unbind as that is the moment the texture was truly last modified, but definitely not after releasing every single reference.
* Fix TXQ for 3D textures.
Assumes the texture is 3D if the component mask contains Z.
This fixes a bug in UE4 games where parts of the map had garbage pointers to lighting voxels, as the lookup 3D texture was not being initialized. Most notable game is THPS1+2.
May need another PR to keep image store data alive and properly flush it in order using the AutoDeleteCache.
* Get sampler type for TextureSize from bound textures.
* Initial Implementation
* Further improvements (no support for float/64-bit types)
* Merge atomic and reduce instructions, add missing format switch
* Fix rebase issues.
* Not used.
* Whoops. Fixed.
* Partial implementation of inc/dec, cleanup and TODOs
* Remove testing path
* Address Feedback
* Avoid deleting textures when their data does not overlap.
It's possible that while two textures start and end addresses indicate an overlap, that the actual data contained within them is sparse due to a layer stride. One such possibility is array slices of a cubemap at different mip levels - they overlap on a whole, but the actual texture data fills the gaps between each other's layers rather than actually overlapping.
This fixes issues with UE4 games having incorrect lighting (solid white screen or really dark shadows). There are still remaining issues with games that use the 3D texture prebaked lighting, such as THPS1+2.
This PR also fixes a bug with TexturePool's resized texture handling where the base level in the descriptor was not considered.
* AllRegions granularity for 3d textures is now by level rather than by slice.
* Address feedback
* Only reupload the texture scale array if it changes.
Before, this would be called all the time if any shader needed a scale value. The cost of doing this has increased with threaded-gal, as the scale array is copied to a span pool, and it's was called on pretty much every draw sometimes.
This improves GPU performance in games, scaled or not. Most affected game seems to be Xenoblade Chronicles: Definitive Edition.
* Just use = instead of |=
* Initial Implementation
About as fast as nvidia GL multithreading, can be improved with faster command queuing.
* Struct based command list
Speeds up a bit. Still a lot of time lost to resource copy.
* Do shader init while the render thread is active.
* Introduce circular span pool V1
Ideally should be able to use structs instead of references for storing these spans on commands. Will try that next.
* Refactor SpanRef some more
Use a struct to represent SpanRef, rather than a reference.
* Flush buffers on background thread
* Use a span for UpdateRenderScale.
Much faster than copying the array.
* Calculate command size using reflection
* WIP parallel shaders
* Some minor optimisation
* Only 2 max refs per command now.
The command with 3 refs is gone. 😌
* Don't cast on the GPU side
* Remove redundant casts, force sync on window present
* Fix Shader Cache
* Fix host shader save.
* Fixup to work with new renderer stuff
* Make command Run static, use array of delegates as lookup
Profile says this takes less time than the previous way.
* Bring up to date
* Add settings toggle. Fix Muiltithreading Off mode.
* Fix warning.
* Release tracking lock for flushes
* Fix Conditional Render fast path with threaded gal
* Make handle iteration safe when releasing the lock
This is mostly temporary.
* Attempt to set backend threading on driver
Only really works on nvidia before launching a game.
* Fix race condition with BufferModifiedRangeList, exceptions in tracking actions
* Update buffer set commands
* Some cleanup
* Only use stutter workaround when using opengl renderer non-threaded
* Add host-conditional reservation of counter events
There has always been the possibility that conditional rendering could use a query object just as it is disposed by the counter queue. This change makes it so that when the host decides to use host conditional rendering, the query object is reserved so that it cannot be deleted. Counter events can optionally start reserved, as the threaded implementation can reserve them before the backend creates them, and there would otherwise be a short amount of time where the counter queue could dispose the event before a call to reserve it could be made.
* Address Feedback
* Make counter flush tracked again.
Hopefully does not cause any issues this time.
* Wait for FlushTo on the main queue thread.
Currently assumes only one thread will want to FlushTo (in this case, the GPU thread)
* Add SDL2 headless integration
* Add HLE macro commands.
Co-authored-by: Mary <mary@mary.zone>
* Add support for HLE macros and accelerate MultiDrawElementsIndirectCount
* Add missing barrier
* Fix index buffer count
* Add support check for each macro hle before use
* Add missing xml doc
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
This greatly reduces memory usage in games that aggressively reuse memory without removing dead textures from the pool, such as the Xenoblade games, UE3 games, and to a lesser extent, UE4/unity games.
This change stops memory usage from ballooning in xenoblade and some other games. It will also reduce texture view/dependency complexity in some games - for example in MK8D it will reduce the number of surface copies between lighting cubemaps generated for actors.
There shouldn't be any performance impact from doing this, though the deletion and creation of textures could be improved by improving the OpenGL texture storage cache, which is very simple and limited right now. This will be improved in future.
Another potential error has been fixed with the texture cache, which could prevent data loss when data is interchangably written to textures from both the GPU and CPU. It was possible that the dirty flag for a texture would be consumed without the data being synchronized on next use, due to the old overlap check. This check no longer consumes the dirty flag.
Please test a bunch of games to make sure they still work, and there are no performance regressions.
Got this the wrong way round - was causing games to try synchronize mipmap levels of like 52 on a 3d texture with 6 levels. Also, corrected the variable name in the method that _was_ working.
* Use "Undesired" scale mode for certain textures rather than blacklisting
* Nit
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Replace BGRA and scale uniforms with a uniform block
* Setting the data again on program change is no longer needed
* Optimize and resolve some warnings
* Avoid redundant support buffer updates
* Some optimizations to BindBuffers (now inlined)
* Unify render scale arrays
* Use a new approach for shader BRX targets
* Make shader cache actually work
* Improve the shader pattern matching a bit
* Extend LDC search to predecessor blocks, catches more cases
* Nit
* Only save the amount of constant buffer data actually used. Avoids crashes on partially mapped buffers
* Ignore Rd on predicate instructions, as they do not have a Rd register (catches more cases)
* Return mapped buffer pointer directly for flush, WriteableRegion for textures
A few changes here to generally improve performance, even for platforms not using the persistent buffer flush.
- Texture and buffer flush now return a ReadOnlySpan<byte>. It's guaranteed that this span is pinned in memory, but it will be overwritten on the next flush from that thread, so it is expected that the data is used before calling again.
- As a result, persistent mappings no longer copy to a new array - rather the persistent map is returned directly as a Span<>. A similar host array is used for the glGet flushes instead of allocating new arrays each time.
- Texture flushes now do their layout conversion into a WriteableRegion when the texture is not MultiRange, which allows the flush to happen directly into guest memory rather than into a temporary span, then copied over. This avoids another copy when doing layout conversion.
Overall, this saves 1 data copy for buffer flush, 1 copy for linear textures with matching source/target stride, and 2 copies for block textures or linear textures with mismatching strides.
* Fix tests
* Fix array pointer for Mesa/Intel path
* Address some feedback
* Update method for getting array pointer.
* 3D engine now uses DeviceState too, plus new state modification tracking
* Remove old methods code
* Remove GpuState and friends
* Optimize DeviceState, force inline some functions
* This change was not supposed to go in
* Proper channel initialization
* Optimize state read/write methods even more
* Fix debug build
* Do not dirty state if the write is redundant
* The YControl register should dirty either the viewport or front face state too, to update the host origin
* Avoid redundant vertex buffer updates
* Move state and get rid of the Ryujinx.Graphics.Gpu.State namespace
* Comments and nits
* Fix rebase
* PR feedback
* Move changed = false to improve codegen
* PR feedback
* Carry RyuJIT a bit more
* Use DeviceState for compute and i2m
* Migrate 2D class, more comments
* Migrate DMA copy engine
* Remove now unused code
* Replace GpuState by GpuAccessorState on GpuAcessor, since compute no longer has a GpuState
* More comments
* Add logging (disabled)
* Add back i2m on 3D engine
* Honour copy dependencies when switching render target
When switching from one render target to another, when both have a copy dependency to each other, a copy can be deferred on the second target when unbinding the first.
Before, this would not be honoured before binding the new texture, so the copy would stay deferred until the render targets change again, at which point it would copy in old data and essentially clear all the draws done during that time.
This change runs synchronize memory to make sure that copies are honoured. This can cause a redundant copy, but it's better than it breaking for now.
This should fix miiedit on AMD/Intel GPUs on windows. May fix other games, or perhaps rare copy dependency bugs on NVIDIA too.
* Address feedback
* Make GPU memory manager a member of GPU channel
* Move physical memory instance to the memory manager, and the caches to the physical memory
* PR feedback
* Ground work for separate GPU channels
* Rename TextureManager to TextureCache
* Decouple texture bindings management from the texture cache
* Rename BufferManager to BufferCache
* Decouple buffer bindings management from the buffer cache
* More comments and proper disposal
* PR feedback
* Force host state update on channel switch
* Typo
* PR feedback
* Missing using
This greatly speeds up games that constantly resize buffers, and removes stuttering on games that resize large buffers occasionally:
- Large improvement on Super Mario 3D All-Stars (#1663 needed for best performance)
- Improvement to Hyrule Warriors: AoC, and UE4 games. These games can still stutter due to texture creation/loading.
- Small improvement to other games, potential 1-frame stutters avoided.
`ForceSynchronizeMemory`, which was added with POWER, is no longer needed. Some tests have been added for the MultiRegionHandle.
Before this, all samplers instance were leaking on exit because the
dispose method was never getting called.
This fix this issue by making TextureBindingsManager disposable and
calling the dispose method in the TextureManager.
This fixes a regression caused by #980, that was causing a crash on New
Super Lucky's Tale.
As always, this need feedback on possible regression on any games.
Fix#2343.
* Refactoring of KMemoryManager class
* Replace some trivial uses of DRAM address with VA
* Get rid of GetDramAddressFromVa
* Abstracting more operations on derived page table class
* Run auto-format on KPageTableBase
* Managed to make TryConvertVaToPa private, few uses remains now
* Implement guest physical pages ref counting, remove manual freeing
* Make DoMmuOperation private and call new abstract methods only from the base class
* Pass pages count rather than size on Map/UnmapMemory
* Change memory managers to take host pointers
* Fix a guest memory leak and simplify KPageTable
* Expose new methods for host range query and mapping
* Some refactoring of MapPagesFromClientProcess to allow proper page ref counting and mapping without KPageLists
* Remove more uses of AddVaRangeToPageList, now only one remains (shared memory page checking)
* Add a SharedMemoryStorage class, will be useful for host mapping
* Sayonara AddVaRangeToPageList, you served us well
* Start to implement host memory mapping (WIP)
* Support memory tracking through host exception handling
* Fix some access violations from HLE service guest memory access and CPU
* Fix memory tracking
* Fix mapping list bugs, including a race and a error adding mapping ranges
* Simple page table for memory tracking
* Simple "volatile" region handle mode
* Update UBOs directly (experimental, rough)
* Fix the overlap check
* Only set non-modified buffers as volatile
* Fix some memory tracking issues
* Fix possible race in MapBufferFromClientProcess (block list updates were not locked)
* Write uniform update to memory immediately, only defer the buffer set.
* Fix some memory tracking issues
* Pass correct pages count on shared memory unmap
* Armeilleure Signal Handler v1 + Unix changes
Unix currently behaves like windows, rather than remapping physical
* Actually check if the host platform is unix
* Fix decommit on linux.
* Implement windows 10 placeholder shared memory, fix a buffer issue.
* Make PTC version something that will never match with master
* Remove testing variable for block count
* Add reference count for memory manager, fix dispose
Can still deadlock with OpenAL
* Add address validation, use page table for mapped check, add docs
Might clean up the page table traversing routines.
* Implement batched mapping/tracking.
* Move documentation, fix tests.
* Cleanup uniform buffer update stuff.
* Remove unnecessary assignment.
* Add unsafe host mapped memory switch
On by default. Would be good to turn this off for untrusted code (homebrew, exefs mods) and give the user the option to turn it on manually, though that requires some UI work.
* Remove C# exception handlers
They have issues due to current .NET limitations, so the meilleure one fully replaces them for now.
* Fix MapPhysicalMemory on the software MemoryManager.
* Null check for GetHostAddress, docs
* Add configuration for setting memory manager mode (not in UI yet)
* Add config to UI
* Fix type mismatch on Unix signal handler code emit
* Fix 6GB DRAM mode.
The size can be greater than `uint.MaxValue` when the DRAM is >4GB.
* Address some feedback.
* More detailed error if backing memory cannot be mapped.
* SetLastError on all OS functions for consistency
* Force pages dirty with UBO update instead of setting them directly.
Seems to be much faster across a few games. Need retesting.
* Rebase, configuration rework, fix mem tracking regression
* Fix race in FreePages
* Set memory managers null after decrementing ref count
* Remove readonly keyword, as this is now modified.
* Use a local variable for the signal handler rather than a register.
* Fix bug with buffer resize, and index/uniform buffer binding.
Should fix flickering in games.
* Add InvalidAccessHandler to MemoryTracking
Doesn't do anything yet
* Call invalid access handler on unmapped read/write.
Same rules as the regular memory manager.
* Make unsafe mapped memory its own MemoryManagerType
* Move FlushUboDirty into UpdateState.
* Buffer dirty cache, rather than ubo cache
Much cleaner, may be reusable for Inline2Memory updates.
* This doesn't return anything anymore.
* Add sigaction remove methods, correct a few function signatures.
* Return empty list of physical regions for size 0.
* Also on AddressSpaceManager
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Compare aligned size for largest mip level when considering sampler resize
When selecting a texture that's a view for a sampler resize, we should take care that resizing it doesn't change the aligned size of any larger mip levels.
This PR covers two cases:
- When creating a view of the texture, we check that the aligned size of the view shifted up to level 0 still matches the aligned size of the container. If it does not, a copy dependency is created rather than resizing.
- When searching for a texture for sampler, textures that do _not_ match our aligned size when both are shifted up by its base level are not considered an exact match, as resizing the found texture will cause the mip 0 aligned size to change. It will create a copy dependency view instead.
Fixes graphical errors and crashes (on flush) in various Unity games that use render-to-texture.
* Move shared code to its own method.
* Move shader resource descriptor creation out of the backend
* Remove now unused code, and other nits
* Shader cache version bump
* Nits
* Set format for bindless image load/store
* Fix buffer write flag
* Pass CbufSlot when getting info from the texture descriptor
Fixes some issues with bindless textures, when CbufSlot is not equal to the current TextureBufferIndex.
Specifically fixes a random chance of full screen colour flickering in Super Mario Party.
* Apply suggestions from code review
Oops
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
Signal and setup events correctly
Eliminate possible races
Use a single event
Mark volatiles and reduce scope of waithandles
Common handler
100ms -> 50ms
* Salieri: Add blacklist system and blacklist shaders using bindless
Currently the shader cache doesn't have the right format to support
bindless textures correctly and may cache shaders that it cannot rebuild
after host invalidation.
This PR address the issue by blacklisting shaders using bindless
textures.
THis also support detection of already cached broken shader and handle removal
of those.
* Move to a feature flags design to avoid intrusive changes in the translator
This remove the auto correct behaviour
* Reduce diff on TranslationFlags
* Reduce comma on last entry of TranslationFlags
* Fix inverted logic and remove leftovers
* remove debug edits oops
* Improve linear texture compatibility rules
Fixes an issue where small or width-aligned (rather than byte aligned) textures would fail to create a view of existing data. Creates a copy dependency as size change may be risky.
* Minor cleanup
* Remove Size Change for Copy Depenedencies
The copy to the target (potentially different sized) texture can properly deal with cropping by itself.
* Move StrideAlignment and GobAlignment into Constants
* Improve Buffer Textures and flush Image Stores
Fixes a number of issues with buffer textures:
- Reworked Buffer Textures to create their buffers in the TextureManager, then bind them with the BufferManager later.
- Fixes an issue where a buffer texture's buffer could be invalidated after it is bound, but before use.
- Fixed width unpacking for large buffer textures. The width is now 32-bit rather than 16.
- Force buffer textures to be rebound whenever any buffer is created, as using the handle id wasn't reliable, and the cost of binding isn't too high.
Fixes vertex explosions and flickering animations in UE4 games.
* Set ImageStore flag... for ImageStore.
* Check the offset and size.
* Improve handling for unmapped GPU resources
- Fixed a memory tracking bug that would set protection on empty PTEs
- When a texture's memory is (partially) unmapped, all pool references are forcibly removed and the texture must be rediscovered to draw with it. This will also force the texture discovery to always compare the texture's range for a match.
- RegionHandles now know if they are unmapped, and automatically unset their dirty flag when unmapped.
- Partial texture sync now loads only the region of texture that has been modified. Unmapped memory tracking handles cause dirty flags for a texture group handle to be ignored.
This greatly improves the emulator's stability for newer UE4 games.
* Address feedback, fix MultiRange slice
Fixed an issue where the size of the multi-range slice would be miscalculated.
* Update Ryujinx.Memory/Range/MultiRange.cs (feedback)
Co-authored-by: Mary <thog@protonmail.com>
Co-authored-by: Mary <thog@protonmail.com>
* Initial implementation (3d tex mips broken)
This works rather well for most games, just need to fix 3d texture mips.
* Cleanup
* Address feedback
* Copy Dependencies and various other fixes
* Fix layer/level offset for copy from view<->view.
* Remove dirty flag from dependency
The dirty flag behaviour is not needed - DeferredCopy is all we need.
* Fix tracking mip slices.
* Propagate granularity (fix astral chain)
* Address Feedback pt 1
* Save slice sizes as part of SizeInfo
* Fix nits
* Fix disposing multiple dependencies causing a crash
This list is obviously modified when removing dependencies, so create a copy of it.
* Initial implementation of buffer flush (VERY WIP)
* Host shaders need to be rebuilt for the SSBO write flag.
* New approach with reserved regions and gl sync
* Fix a ton of buffer issues.
* Remove unused buffer unmapped behaviour
* Revert "Remove unused buffer unmapped behaviour"
This reverts commit f1700e52fb8760180ac5e0987a07d409d1e70ece.
* Delete modified ranges on unmap
Fixes potential crashes in Super Smash Bros, where a previously modified range could lie on either side of an unmap.
* Cache some more delegates.
* Dispose Sync on Close
* Also create host sync for GPFifo syncpoint increment.
* Copy buffer optimization, add docs
* Fix race condition with OpenGL Sync
* Enable read tracking on CommandBuffer, insert syncpoint on WaitForIdle
* Performance: Only flush individual pages of SSBO at a time
This avoids flushing large amounts of data when only a small amount is actually used.
* Signal Modified rather than flushing after clear
* Fix some docs and code style.
* Introduce a new test for tracking memory protection.
Sucessfully demonstrates that the bug causing write protection to be cleared by a read action has been fixed. (these tests fail on master)
* Address Comments
* Add host sync for SetReference
This ensures that any indirect draws will correctly flush any related buffer data written before them. Fixes some flashing and misplaced world geometry in MH rise.
* Make PageAlign static
* Re-enable read tracking, for reads.
* Support for resources on non-contiguous GPU memory regions
* Implement MultiRange physical addresses, only used with a single range for now
* Actually use non-contiguous ranges
* GetPhysicalRegions fixes
* Documentation and remove Address property from TextureInfo
* Finish implementing GetWritableRegion
* Fix typo
* Implement shader CC mode for ISCADD, X mode for ISETP and fix STS/STG with RZ
* Fix STG too and bump shader cache version
* Fix wrong name
* Fix Carry being inverted on comparison
* Interrupt GPU command processing when a frame's fence is reached.
* Accumulate times rather than %s
* Accurate timer for vsync
Spin wait for the last .667ms of a frame. Avoids issues caused by signalling 16ms vsync. (periodic stutters in smo)
* Use event wait for better timing.
* Fix lazy wait
Windows doesn't seem to want to do 1ms consistently, so force a spin if we're less than 2ms.
* A bit more efficiency on frame waits.
Should now wait the remainder 0.6667 instead of 1.6667 sometimes (odd waits above 1ms are reliable, unlike 1ms waits)
* Better swap interval 0 solution
737 fps without breaking a sweat. Downside: Vsync can no longer be disabled on games that use the event heavily (link's awakening - which is ok since it breaks anyways)
* Fix comment.
* Address Comments.
* Implement TreeMap from scratch.
Begin implementation of MemoryBlockManager
* Implement GetFreePosition using MemoryBlocks
* Implementation of Memory Management using a Tree.
Still some issues to work around, but promising thus far.
* Resolved invalid mapping issue.
Performance appears promising.
* Add tick metrics
* Use the logger instead
* Use debug loggin instead of info.
* Remove unnecessary code. Add descriptions of added functions.
* Improve memory allocation even further. As well as improve speed of position fetching.
* Add TreeDictionary to Ryujinx Commons
Removed Unnecessary Usigns
* Add a Performance Profiler + Improve ReserveFixed
* Begin transition to allocation in nvdrv
* Create singleton nvmemallocator
* Moved Allocation into Nv Related Files
As requested by gdkchan, any allocation of memory has been moved into the driver files.
Mapping remains in the GPU MemoryManager.
* Remove unnecessary usings
* Add missing descriptions
* Correct descriptions
* Fix formatting.
* Remove unnecessary whitespace
* Formatting / Convention Updates
* Changes / Fixes
Made syntax and convention changes as requested by gdkchan.
Fixed an issue where IsRegionUsed would return the wrong boolean.
Fixed an issue where GetFreePosition was asked for an address instead of a size.
* Undo commenting of Assert in shader cache
* Update Ryujinx.Common/Collections/TreeDictionary.cs
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Resolved many suggestions
* Implement Improved TreeDictionary
Based off of Pseudo code and custom implementations.
* Rename _set to _dictionary
* Remove unused code
* Remove unused code.
* Remove unnecessary MapLow function.
* Resolve data-structure based issues
* Make adjustments to memory management.
Deactive de-allocation for now, it causes more harm than good.
* Minor refactorings + Re-implement deallocation
Also cleaned up unnecessary code.
* Add Tests for TreeDictionary
* Update data structure to properly balance the tree
* Experimental Implementation:
1. Reduce Time to Next Node to O(1) Runtime
2. Reduce While Loop Ct To 2 (In Most Cases)
* Address issues w/ Deallocating Memory
* Final Build
+ Fully Implement Dictionary Interface for new Data Structure
+ Cover All Memory Allocation Edge Cases, particularly w/ Games that De-Allocate a lot.
* Minor Corrections
Give TreeDictionary its own count (do not depend on inner dictionary)
Properly remove adjacent allocations
* Add AsList
* Fix bug where internal dictionary wasn't being updated w/ new node for overwritten key.
* Address comments in review.
* Fix issue where block wouldn't break out (Fixes UE4 issues)
* Update descriptions
* Update descriptions
* Reduce Node visibility to protect TreeDictionary Integrity + Remove usage of struct.
* Update tests to use new TreeDictionary implementation.
* Remove usage of dictionary in TreeDictionary
* Refactoring / Renaming
* Remove unneeded memoryblock class.
* Add space for while
* Add space for if
* Formatting / descriptions
* Clarified some descriptions
* Reduce visibility of memory allocator
* Edit method names to make more sense as memory blocks are no longer in use.
* Make names consistent.
* Protect against npe when sucessorof is called against keys that don't exist. (Not in use by memory manager, this is for other prs that might use this data structure)
* Possible edge-case resolve
* Update Ryujinx.Common/Collections/TreeDictionary.cs
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Update Ryujinx.HLE/HOS/Services/Nv/NvMemoryAllocator.cs
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Reduce # of unnecessary duplicate variables / Reduce visibility of variables only internally used.
* Rename count to _count
* Update Description of Add method.
* Fix copypasta
* Address comments
* Address comments
* Remove whitespace
* Address comments, condense variables.
* Consolidate vars
* Fix whitespace.
* Nit
* Fix exception msg
* Fix arrayIndex check
* Fix arrayIndex check + indexer
* Remove whitespace from cast
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* IPC refactor part 2: Use ReplyAndReceive on HLE services and remove special handling from kernel
* Fix for applet transfer memory + some nits
* Keep handles if possible to avoid server handle table exhaustion
* Fix IPC ZeroFill bug
* am: Correctly implement CreateManagedDisplayLayer and implement CreateManagedDisplaySeparableLayer
CreateManagedDisplaySeparableLayer is requires since 10.x+ when appletResourceUserId != 0
* Make it exit properly
* Make ServiceNotImplementedException show the full message again
* Allow yielding execution to avoid starving other threads
* Only wait if active
* Merge IVirtualMemoryManager and IAddressSpaceManager
* Fix Ro loading data from the wrong process
Co-authored-by: Thog <me@thog.eu>
This adds the guest GPU accessor to hashes computation.
As this change all the hashes from the cache, I added some migration
logic.
This is required for #1755.
* Allow copy destination to have a different scale from source
Will result in more scaled copy destinations, but allows scaling in some games that copy textures to the output framebuffer.
* Support copying multiple levels/layers
Uses glFramebufferTextureLayer to copy multiple layers, copies levels individually (and scales the regions).
Remove CopyArrayScaled, since the backend copy handles it now.
* shader cache: Fix Linux boot issues
This rollback the init logic back to previous state, and replicate the
way PTC handle initialization.
* shader cache: set default state of ready for translation event to false
* Fix cpu unit tests
* shader cache: Fix possible race causing crashes on manifest at startup
This fix a misplace function call ending up causing possibly two write
on the cache.info at the same time.
* shader cache: Make RemoveManifestEntries async too to be sure all operations are perform before starting the game
* shader cache: Fix invalid virtual address clean up
This fix an issue causing the virtual address of texture descriptors to
not be cleaned up when caching and instead cleaning texture format and swizzle.
This should fix duplicate high duplication in the cache for certain
games and possible texture corruption issues.
**THIS WILL INVALIDATE ALL SHADER CACHE LEVELS CONSIDERING THE NATURE OF THE ISSUE**
* shader cache: Address gdk's comment
* infra: Migrate to .NET 5
This migrate projects and CI to .NET 5
* Remove language version restrictions (now on 9.0 by default)
* infra: pin .NET 5 to avoid later issues
* infra: Cleanup csproj files
* infra: update dependencies
* infra: Add temporary workaround for a bug in Vector128.Create
see https://github.com/dotnet/runtime/issues/44704 for more informations
"Screen scissor" is the minimum size of all render targets, and is set when any render target is bound on NVN or OpenGL. Since it works on all active texture's real sizes, it is therefore more reliable than viewport 0's width, and is actually set before clear.
This fixes a regression with Hyrule Warriors: Age Of Calamity's cubemaps, which did not set viewport dimensions before clear. This resulted in attempting to create a cubemap with rectangular sides, which is logically and physically impossible. (also it just fails)
Here come Salieri, my implementation of a disk shader cache!
"I'm sure you know why I named it that."
"It doesn't really mean anything."
This implementation collects shaders at runtime and cache them to be later compiled when starting a game.
* Size hints for copy regions and viewport dimensions to avoid data loss
* Reword comment.
* Use info for the rule rather than calculating aligned size.
* Reorder min/max, remove spaces
* Only report that commands are available when the queue is not empty.
* Address Feedback
Co-authored-by: FICTURE7 <FICTURE7@gmail.com>
Co-authored-by: FICTURE7 <FICTURE7@gmail.com>
* Fix transform feedback errors caused by host pause/resume
* Fix TFB being used as something else issue with copies
* This is supposed to be StreamCopy
* WIP Range Tracking
- Texture invalidation seems to have large problems
- Buffer/Pool invalidation may have problems
- Mirror memory tracking puts an additional `add` in compiled code, we likely just want to make HLE access slower if this is the final solution.
- Native project is in the messiest possible location.
- [HACK] JIT memory access always uses native "fast" path
- [HACK] Trying some things with texture invalidation and views.
It works :)
Still a few hacks, messy things, slow things
More work in progress stuff (also move to memory project)
Quite a bit faster now.
- Unmapping GPU VA and CPU VA will now correctly update write tracking regions, and invalidate textures for the former.
- The Virtual range list is now non-overlapping like the physical one.
- Fixed some bugs where regions could leak.
- Introduced a weird bug that I still need to track down (consistent invalid buffer in MK8 ribbon road)
Move some stuff.
I think we'll eventually just put the dll and so for this in a nuget package.
Fix rebase.
[WIP] MultiRegionHandle variable size ranges
- Avoid reprotecting regions that change often (needs some tweaking)
- There's still a bug in buffers, somehow.
- Might want different api for minimum granularity
Fix rebase issue
Commit everything needed for software only tracking.
Remove native components.
Remove more native stuff.
Cleanup
Use a separate window for the background context, update opentk. (fixes linux)
Some experimental changes
Should get things working up to scratch - still need to try some things with flush/modification and res scale.
Include address with the region action.
Initial work to make range tracking work
Still a ton of bugs
Fix some issues with the new stuff.
* Fix texture flush instability
There's still some weird behaviour, but it's much improved without this. (textures with cpu modified data were flushing over it)
* Find the destination texture for Buffer->Texture full copy
Greatly improves performance for nvdec videos (with range tracking)
* Further improve texture tracking
* Disable Memory Tracking for view parents
This is a temporary approach to better match behaviour on master (where invalidations would be soaked up by views, rather than trigger twice)
The assumption is that when views are created to a texture, they will cover all of its data anyways. Of course, this can easily be improved in future.
* Introduce some tracking tests.
WIP
* Complete base tests.
* Add more tests for multiregion, fix existing test.
* Cleanup Part 1
* Remove unnecessary code from memory tracking
* Fix some inconsistencies with 3D texture rule.
* Add dispose tests.
* Use a background thread for the background context.
Rather than setting and unsetting a context as current, doing the work on a dedicated thread with signals seems to be a bit faster.
Also nerf the multithreading test a bit.
* Copy to texture with matching alignment
This extends the copy to work for some videos with unusual size, such as tutorial videos in SMO. It will only occur if the destination texture already exists at XCount size.
* Track reads for buffer copies. Synchronize new buffers before copying overlaps.
* Remove old texture flushing mechanisms.
Range tracking all the way, baby.
* Wake the background thread when disposing.
Avoids a deadlock when games are closed.
* Address Feedback 1
* Separate TextureCopy instance for background thread
Also `BackgroundContextWorker.InBackground` for a more sensible idenfifier for if we're in a background thread.
* Add missing XML docs.
* Address Feedback
* Maybe I should start drinking coffee.
* Some more feedback.
* Remove flush warning, Refocus window after making background context
* Use a better viewport flipping approach
* New approach to detect depth mode
* nit: Sort method on the OpenGL backend
* Adjust spacing on comment
* Unswap near and far parameters based on ScaleZ
* Add swizzle matching rules.
Improves rules which try to match incompatible formats as perfect, such as D32 float -> R32 float.
Remove Format.HasOneComponent, since this information is now available via the FormatInfo struct.
* Fix this rule.
* Update component counts for depth formats.
* Initial implementation. Still pending better valid-overlap handling,
disposed pool, compressed format flush fix.
* Very messy backend resource cache.
* Oops
* Dispose -> Release
* Improve Release/Dispose.
* More rule refinement.
* View compatibility levels as an enum - you can always know if a view is only copy compatible.
* General cleanup.
Use locking on the resource cache, as it is likely to be used by other threads in future.
* Rename resource cache to resource pool.
* Address some of the smaller nits.
* Fix regression with MK8 lens flare
Texture flushes done the old way should trigger memory tracking.
* Use TextureCreateInfo as a key.
It now implements IEquatable and generates a hashcode based on width/height.
* Fix size change for compressed+non-compressed view combos.
Before, this could set either the compressed or non compressed texture with a size with the wrong size, depending on which texture had its size changed. This caused exceptions when flushing the texture.
Now it correctly takes the block size into account, assuming that these textures are only related because a pixel in the non-compressed texture represents a block in the compressed one.
* Implement JD's suggestion for HashCode Combine
Co-authored-by: jduncanator <1518948+jduncanator@users.noreply.github.com>
* Address feedback
* Address feedback.
Co-authored-by: jduncanator <1518948+jduncanator@users.noreply.github.com>
* Silence several build warnings
* Remove fixed buffers from NVDEC struct
* Remove unused field and usings
* Fix wrong name
* Silence more warning on H264 PictureInfo
* Logger class changes only
Now compile-time checking is possible with the help of Nullable Value
types.
* Misc formatting
* Manual optimizations
PrintGuestLog
PrintGuestStackTrace
Surfaceflinger DequeueBuffer
* Reduce SendVibrationXX log level to Debug
* Add Notice log level
This level is always enabled and used to print system info, etc...
Also, rewrite LogColor to switch expression as colors are static
* Unify unhandled exception event handlers
* Print enabled LogLevels during init
* Re-add App Exit disposes in proper order
nit: switch case spacing
* Revert PrintGuestStackTrace to Info logs due to #1407
PrintGuestStackTrace is now called in some critical error handlers
so revert to old behavior as KThread isn't part of Guest.
* Batch replace Logger statements
* Add new structures from official docs, start migrating GPFifo
* Finish migration to new GPFifo processor
* Implement fast constant buffer data upload
* Migrate to new GPFifo class
* XML docs
* Initial transform feedback support
* Some nits and fixes
* Update ReportCounterType and Write method
* Can't change shader or TFB bindings while TFB is active
* Fix geometry shader input names with new naming
* Initial NVDEC and VIC implementation
* Update FFmpeg.AutoGen to 4.3.0
* Add nvdec dependencies for Windows
* Unify some VP9 structures
* Rename VP9 structure fields
* Improvements to Video API
* XML docs for Common.Memory
* Remove now unused or redundant overloads from MemoryAccessor
* NVDEC UV surface read/write scalar paths
* Add FIXME comments about hacky things/stuff that will need to be fixed in the future
* Cleaned up VP9 memory allocation
* Remove some debug logs
* Rename some VP9 structs
* Remove unused struct
* No need to compile Ryujinx.Graphics.Host1x with unsafe anymore
* Name AsyncWorkQueue threads to make debugging easier
* Make Vp9PictureInfo a ref struct
* LayoutConverter no longer needs the depth argument (broken by rebase)
* Pooling of VP9 buffers, plus fix a memory leak on VP9
* Really wish VS could rename projects properly...
* Address feedback
* Remove using
* Catch OperationCanceledException
* Add licensing informations
* Add THIRDPARTY.md to release too
Co-authored-by: Thog <me@thog.eu>
* Initial implementation of Render Target Scaling
Works with most games I have. No GUI option right now, it is hardcoded.
Missing handling for texelFetch operation.
* Realtime Configuration, refactoring.
* texelFetch scaling on fragment shader (WIP)
* Improve Shader-Side changes.
* Fix potential crash when no color/depth bound
* Workaround random uses of textures in compute.
This was blacklisting textures in a few games despite causing no bugs. Will eventually add full support so this doesn't break anything.
* Fix scales oscillating when changing between non-native scales.
* Scaled textures on compute, cleanup, lazier uniform update.
* Cleanup.
* Fix stupidity
* Address Thog Feedback.
* Cover most of GDK's feedback (two comments remain)
* Fix bad rename
* Move IsDepthStencil to FormatExtensions, add docs.
* Fix default config, square texture detection.
* Three final fixes:
- Nearest copy when texture is integer format.
- Texture2D -> Texture3D copy correctly blacklists the texture before trying an unscaled copy (caused driver error)
- Discount small textures.
* Remove scale threshold.
Not needed right now - we'll see if we run into problems.
* All CPU modification blacklists scale.
* Fix comment.
* Fix compilation warnings and use new LibHac APIs for executable loading
* Migrate NSO loader to the new reader and fix kip loader
* Fix CS0162 restore
* Remove extra return lines
* Address Moose's comment
* Delete DelegateTypes.cs
* Delete DelegateCache.cs
* Add files via upload
* Update Horizon.cs
* Update Program.cs
* Update MainWindow.cs
* Update Aot.cs
* Update RelocEntry.cs
* Update Translator.cs
* Update MemoryManager.cs
* Update InstEmitMemoryHelper.cs
* Update Delegates.cs
* Nit.
* Nit.
* Nit.
* 10 fewer MSIL bytes for us
* Add comment. Nits.
* Update Translator.cs
* Update Aot.cs
* Nits.
* Opt..
* Opt..
* Opt..
* Opt..
* Allow to change compression level.
* Update MemoryManager.cs
* Update Translator.cs
* Manage corner cases during the save phase. Nits.
* Update Aot.cs
* Translator response tweak for Aot disabled. Nit.
* Nit.
* Nits.
* Create DelegateHelpers.cs
* Update Delegates.cs
* Nit.
* Nit.
* Nits.
* Fix due to #784.
* Fixes due to #757 & #841.
* Fix due to #846.
* Fix due to #847.
* Use MethodInfo for managed method calls.
Use IR methods instead of managed methods about Max/Min (S/U).
Follow-ups & Nits.
* Add missing exception messages.
Reintroduce slow path for Fmov_Vi.
Implement slow path for Fmov_Si.
* Switch to the new folder structure.
Nits.
* Impl. index-based relocation information. Impl. cache file version field.
* Nit.
* Address gdkchan comments.
Mainly:
- fixed cache file corruption issue on exit; - exposed a way to disable AOT on the GUI.
* Address AcK77 comment.
* Address Thealexbarney, jduncanator & emmauss comments.
Header magic, CpuId (FI) & Aot -> Ptc.
* Adaptation to the new application reloading system.
Improvements to the call system of managed methods.
Follow-ups.
Nits.
* Get the same boot times as on master when PTC is disabled.
* Profiled Aot.
* A32 support (#897).
* #975 support (1 of 2).
* #975 support (2 of 2).
* Rebase fix & nits.
* Some fixes and nits (still one bug left).
* One fix & nits.
* Tests fix (by gdk) & nits.
* Support translations not only in high quality and rejit.
Nits.
* Added possibility to skip translations and continue execution, using `ESC` key.
* Update SettingsWindow.cs
* Update GLRenderer.cs
* Update Ptc.cs
* Disabled Profiled PTC by default as requested in the past by gdk.
* Fix rejit bug. Increased number of parallel translations. Add stack unwinding stuffs support (1 of 2).
Nits.
* Add stack unwinding stuffs support (2 of 2). Tuned number of parallel translations.
* Restored the ability to assemble jumps with 8-bit offset when Profiled PTC is disabled or during profiling.
Modifications due to rebase.
Nits.
* Limited profiling of the functions to be translated to the addresses belonging to the range of static objects only.
* Nits.
* Nits.
* Update Delegates.cs
* Nit.
* Update InstEmitSimdArithmetic.cs
* Address riperiperi comments.
* Fixed the issue of unjustifiably longer boot times at the second boot than at the first boot, measured at the same time or reference point and with the same number of translated functions.
* Implemented a simple redundant load/save mechanism.
Halved the value of Decoder.MaxInstsPerFunction more appropriate for the current performance of the Translator.
Replaced by Logger.PrintError to Logger.PrintDebug in TexturePool.cs about the supposed invalid texture format to avoid the spawn of the log.
Nits.
* Nit.
Improved Logger.PrintError in TexturePool.cs to avoid log spawn.
Added missing code for FZ handling (in output) for fp max/min instructions (slow paths).
* Add configuration migration for PTC
Co-authored-by: Thog <me@thog.eu>
